3. Shoot the image.
The flash charging time may increase when the battery is low.
Using the Self-timer & Burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is
shot. Use the burst to record four continuous still images shooting.
1. Set the camera to the Record mode (see page 14).
This function only used in still image shooting.
2. Press the
Display
-
3. Shoot the image.
camera will detect the subject brightness and use the
flash only when required.
Flash fires every time you take a photo, regardless of
Always on
lighting conditions.
Slow sync
Flash fires with a slow shutter speed.
Always off
The flash never fires even in dark situation.
button to change the settings:
Option
Single shot
Record a single image.
2-SEC
The shutter release will be delay for 2 seconds.
10-SEC
The shutter release will be delay for 10 seconds.
Record two images in a shot after pressing the shutter
Double
release button 10 and 12 seconds.
Burst
For capturing 4 images in succession.
NOTE:
Description
- 21 -
Need help?
Do you have a question about the MP5 and is the answer not in the manual?