Installing The Mobility Router - Mitel 2000 Series Hardware Installation Manual

1
Mobility Router 2000 Installation

Installing the Mobility Router

1.5 Installing the Mobility Router
Required Tools:
4 each "cage" type mounting nuts (not included)

4 each Pan Head screws, typically 10-32 thread size (not included)

To connect the Mobility Router to the rack:
1
Snap the mounting nuts into the rack at the desired mounting point.
Figure 1-3. Insert Mounting Nuts into Rack
2
Lift the Mobility Router to the desired rack position.
3
Install each Pan Head screw through the Mobility Router's mounting ears into the mounting nuts.
Figure 1-4. Fastening the Mobility Router to the Rack
4
Tighten to 30 inch-lbs. Do not over-tighten.
6 Mobility Router 2000 Series Hardware Installation Guide
tbd screws being inserted (with arrows) into ears