Mitel 2000 Series Hardware Installation Manual page 13

10
Enter the domain name in the format domain-name.com. This suffix is appended to all DNS queries.
11
Assign a password to the default Admin account for future access to the RoamAnywhere Administration Portal.
NOTE
We do not recommend leaving the password field blank.
12
Confirm the password for the default Admin account.
13
After completing the initial configuration wizard, a summary list of the information appears.
To make any changes, enter the number associated with the line to be changed. Verify the information and
press Enter to save the configuration.
14
At the prompt, enter enable.
15
Enter reload to restart the Mobility Router. Wait for the login prompt in the terminal emulation software
window, which indicates that the Mobility Router has finished restarting.
16
Verify a network connection to the Mobility Router can be established by accessing the Administration Portal.
To access the Administration Portal, enter the Mobility Router hostname or IP address in a Web browser:
http://hostname.domain.com/adm
http://a.b.c.d/adm
17
After verifying access to the Administration Portal, disconnect the serial cable. (Console access is no longer
required.)
The Mobility Router is now ready to be configured using the Administration Portal. For more information, see the
RoamAnywhere Mobility Router Administrator' s Guide.
Mobility Router 2000 Series Hardware Installation Guide
Mobility Router 2000 Installation
Using the Initial Configuration Wizard
1
11