Advertisement
EW1270取説(P12-21英).doc 05.01.11 15:53 ページ 18
CLEANING
•
Clean the device using a damp cloth, which can be
moistened with a little washing-up liquid if required.
Do not use scouring materials or solvents such as
alcohol, acetone etc.
•
Never completely submerge the device in water.
•
Remove the nozzle from the device. Hold the nozzle
under running water and then wipe using a dry cloth.
Spare nozzles can be obtained from your local
stockist.
•
The water tank can be cleaned under running water.
Remove the water tank by pulling it downwards,
where it can be removed by pulling over the sealing
ring.
•
Clean the inside of the water tank. Also clean the
water tank seal in order to ensure a long-term sealing
effect.
18
•
Do not pull or bend the hose forcibly. Doing so may
damage the hose and its spring.
•
Slide the water tank over the sealing ring until it
clicks into the markings, place the nozzle into the
nozzle compartment and slide the tank upwards.
When sliding it up, leave the water tank cover open
and make sure that the tip of the nozzle is inside the
tank. Be careful not to accidentally insert or pinch
your finger.
•
Do not fill the water tank with toothpaste, powder or
other chemicals.
•
The use of mouthwash may damage the device.
PROBLEMS - CAUSES AND REMEDIES
Device will not work.
Water pressure too low.
Device not working correctly.
The pump is working, but no water is coming
out of the nozzle.
Batteries not correctly inserted (see page 15).
The batteries are almost empty. Insert new batteries
(see page 15).
•
Water tank is empty. Fill the tank with water.
•
Device is being held in the wrong position.
•
Hold device as upright as possible so that the nozzle
can suck in water.
•
Attach nozzle properly.
•
Clean intake pipe filter.
If the device still does not function properly, stop
using it and contact an authorised service centre.
G B
19
Advertisement
