Introduction - Pneumercator TMS3000 Quick Start Up Manual

Quick Start-up Guide

Introduction

This guide is intended for use as a field help guide for factory-trained technicians when
performing a start-up on the Pneumercator TMS Series tank gauging system. You can use this
guide for both the TMS2000 and TMS3000 consoles. The first part of this guide shows what is
needed to perform a start-up on a FACTORY PREPROGRAMMED TMS Series console. The
second part has the basic wiring needed for the TMS2000 & TMS3000 systems. For detailed
installation instructions please refer to the appropriate TMS Installation Manual. For systems NOT
factory preprogrammed, please refer to the standard TMS Operations Manual for programming
instructions. Please make sure that the Warranty Start-up paperwork is completely filled out by a
factory authorized technician and returned to Pneumercator in a timely fashion to qualify the
system for warranty consideration.
For information on becoming a factory authorized service/start-up technician, please contact
Pneumercator below, or e-mail at training@pneumercator.com. Your local Pneumercator sales
representatives may also be of assistance.
This guide is for reference purposes only. Complete installation guidelines are contained in
the TMS2000 & TMS3000 Installation manuals.
For more information, please contact:
TMS Quick Start-up Guide.docx
Pneumercator Co.
1785 Expressway Drive North
Hauppauge, NY 11788
(631) 293-8450
Fax (631) 293-8533
Toll Free (800) 209-7858
www.pneumercator.com
TMS Series
November 21, 2017