Page 1
ACS-11P-MF Quick Start v1.0 2017/08 Quick Start 「 ACS-11P-MF」Package Checklist The package includes the following items: One ACS-11P-MF module One Quick Start One software utility CD Cables(CA-012x2, CA-013x1, CA-019x1, CA-020x1) Note: If any of these items are missed or damaged, contact the local distributors for more information.
ACS-11P-MF Quick Start v1.0 2017/08 Software Installation Before use, associated software configuration, the steps described as follows: Connect to host PC, network and power supply Figure 3: Host PC, Network and Power supply 01. Make sure that the network settings on the PC are properly configured and functioning properly a.
Page 4
ACS-11P-MF Quick Start v1.0 2017/08 Execute access control setting program (ACS Config Utility) 01. ACS Config Utility can be obtained either from the companion CD or from the ICP DAS FTP site at http://ftp.icpdas.com/pub/cd/ba-ha/acs/acs-11-mf-tc/software/utility/ 02. Click the "Search" button to search for your module Figure 5: The main screen of the ACS Config Utility 03.
Page 5
ACS-11P-MF Quick Start v1.0 2017/08 Add Mifare card number and Pass password Figure 8: Add card number and password setting screen A. Add Mifare card number 01. Select the voice number (0~39): 0 02. Floor control options: Check (enable) / Uncheck (disable) 03.
Page 6
ACS-11P-MF Quick Start v1.0 2017/08 E. Read the pass records 01. Click the "Get Record" button to read a pass record 02. Display Card number [2632646384] / Pass password [1234]、 Status [Pass] and Time [Year/Month/day Hour:Minute:Second] Password Card UID Figure 9: Read screen of pass records...
Page 7
ACS-11P-MF Quick Start v1.0 2017/08 B. Delete pass password 01. Fill in the pass password: 1234(4 digits number) 02. Click the "Del PWD" button 03. Display "Reply OK"; make sure to delete the pass password successfully C. Mifare card induction test 01.
ACS-11P-MF Quick Start v1.0 2017/08 Troubleshooting Item Problem Description Solution Power Failure 1. Please return to the ICP DAS for inspection and (PWR LED Off) repair 1. Make sure cards support Mifare S50 standard ( ISO 14443-A) Cards can not be used 2.