Software Installation - ICP DAS USA ACS-11P-MF Quick Start Manual

 Software Installation
Before use, associated software configuration, the steps described as
follows：
Connect to host PC, network and power supply
01. Make sure that the network settings on the PC are properly configured
and functioning properly
a. Entry the IP address as "192.168.0.x", where "x" is a number
Between 1 and 254 except 1, Subnet mask as "255.255.0.0".
Finally, press "OK" button.
02. Make sure that Windows Firewall or antivirus firewall is properly
configured to allow incoming connections, or temporarily disable these
features
Figure 3: Host PC, Network and Power supply
Figure 4: IP address configuration of Computer
ACS-11P-MF Quick Start v1.0 2017/08
3/8