2.2
Hardware Connections
1. Connect the transducer(s) to the USB-UT 350. Select Single or Dual mode using
the switch located beneath the BNC connectors for the old model. For the new
model the single and dual mode can select using the scope software.
2. Connect the USB 2.0 cable to the USB-UT 350 and your computer.
2.3
Testing the USB-UT350
The USB-UT350 comes with oscilloscope software that enables the user to interact with
the device. Launch the oscilloscope software and view the waveform to ensure that the
software and drivers have been installed correctly.
USB-UT350 User's Guide
Revision 1.77 – 09/30/2009
2-2