Introduction; Features; System Requirements - US Ultratek USB-UT350T User Manual

1 Introduction

The USB-UT350 is the base model of a portable ultrasonic pulser/receiver and analog to
digital converter that can be used for a multitude of applications such as flaw detection,
thickness measurement, Doppler measurement, and flow meter. The following list shows
the other products of this series:
USB-UT350T is the tone burst version of the pulser/receiver. The letter T at the end of
the part number stands for tone burst pulser.
USB-UT350M16(T), USB-UT350M8(T) and USB-UT350M4(T) are the instruments
with 16, 8, and 4 channels respectively.
USB-UT350RT is a relay switching instrument with 16 channels. It is the lowest cost
device with so many channels.
1.1

Features

Adjustable high pulse voltage up to 300V (350V optional)
Adjustable pulse width up to 500 ns
Low noise receiver
Low noise pulser
High speed analog to digital conversion up to 50MHz
Time or position based acquisition
Tone burst pulser version available
Battery monitoring option available
Oscilloscope software included
Software development kit (SDK) for C/C++, Visual BASIC or LabVIEW
available
1.2

System Requirements

The USB-UT350 is designed to operate on any laptop or desktop system running
Windows 2000 (w/SP4) or Windows XP. For standalone operation the device must be
configured using such a system and will then operate independently.
USB-UT350 User's Guide
Revision 1.77 – 09/30/2009
1-1