Toshiba G1IF1 Instruction Manual page 3

6 F 2 S 0 7 5 5
WARNING
 Exposed terminals
Do not touch the terminals of this equipment while the power is on, as the high voltage generated
is dangerous.
 Residual voltage
Hazardous voltage can be present in the DC circuit just after switching off the DC power supply.
It takes approximately 30 seconds for the voltage to discharge.
 Fibre optic
When connecting this equipment via an optical fibre, do not look directly at the optical signal.
CAUTION
 Earth
The earthing terminal of the equipment must be securely earthed.
CAUTION
 Operating environment
The equipment must only used within the range of ambient temperature, humidity and dust
detailed in the specification and in an environment free of abnormal vibration.
 Ratings
Before applying the DC power supply to the equipment, check that they conform to the
equipment ratings.
 Connection cable
Carefully handle the connection cable without applying excessive force.
 Modification
Do not modify this equipment, as this may cause the equipment to malfunction.
 Disposal
When disposing of this equipment, do so in a safe manner according to local regulations.
 2 