Making / Receiving Calls - Geemarc iLoop Plus Manual

MAKING / RECEIVING CALLS

3. MAKING / RECEIVING CALLS
- Place the loop around your neck.
- Switch your hearing aid to T mode.
- Press the ON/OFF button. You are ready
to speak through your iLoop
- The Green LED will turn ON.
- During the call you can adjust the volume
of your device by using the volume control
knob located at the bottom of the iLoop
The iLoop
OFF at the end of the call or after a few
minutes of silence. It will also turn ON
automatically when there is an Incoming
call or if the person at the other end speaks
after a long pause.
NOTE: Voltages presented to the
Telecomminications network are classified
TNV-3 according to EN60950 standard.
NOTE: When the batteries are discharged,
the Red LED will light up. Charge the
batteries immediately to avoid damage to
the unit or the batteries.
TM + will be automatically turned
TM
+.
5
TM +.