Trust START-LINE ACD-200 User Manual page 7

3x
Press the connect button 3 times in quick
succession. The LED indicator will flash and the
light will switch on. The lights will always switch to
the maximum light level first, before they switch to
a certain dimming value (this is the factory setting
or the last set dimming level).
To assure correct dimming of dimmable ESL, this
dimmer always switches to full brightness (100%)
first. Immediately afterwards, the lights are set to
the dim-level that you have chosen.
ACD-200 MAINS SOCKET DIMMER
Send an off-signal with the transmitter. Again, the
lights will switch to the maximum light level first.
Immediately afterwards, the lights will switch to a
lower level (1 step less bright).
2x
stand 8
stand 7
stand 6
stand 5 ç
stand 4 ç
stand 3
OFF
stand 2
stand 1
7