Table of Contents
Advertisement
6．SMS command format
Note: All the setup below can be only made by Center number.
Super User Setup
Set the new center number and new password by SMS through mobile phone. If the setup is successful, the module will
send a reply with 'Config OK the Main User and Password Is Reset To 13689645010 (center no.): 123456 (new
password)'.
Format: #CJML# SN code # new password (6 digits) # Center number#
SN code pls checking it with backside of produt.
Example: #CJML#
Note: Center number must be a mobile phone number, telephone number will not work.
Center Number Setup
Set the center number by SMS through mobile phone. If the setup is successful, the sender will receive "CONFIG OK The
main user is: 13286689393" from the tracker
Format: #710# former password # new password (6 digits) #center number#
For example: #710#000000#000000#13689645010#
Note: All alarming information thereafter including SOS, low power, electronic fence etc. will be sent to this number.
000000 is the default password.
APN (Access Point Name) Setup
Set APN by SMS through mobile phone. If the setup is successful, the sender will receive "CONFIG OK" from the tracker
Format: #802#GSM provider name #APN # Log user name # Log password #
The default APN is CMNET, if the APN doesn't have login user name and password, it can be set 0.
Example 1: #802#Chinamobile#CMNET#0#0#
APN is CMNET, no login user name, no login password
Example 2: #802#CHINAMOBILE#CCDLEN#QIUXIA.21#RX0000#
APN is CCDLEN; the login user name is QIUXIA.21 and login password is RX0000.
#000000#13689645010#
886600000633
Advertisement
Table of Contents
