Leadway LDW-TKV106 User Manual page 10

Line No. Specification
1.2
3.4 MIC-,MIC+
5
6
7
8 MOTOR
9
10
11
Notes of the relay wiring
The relay wiring of pump: oil connectors of both ends are affine white line (85)and a fine
yellow line (86).The fine white line (85) is connected to vehicle positive power (+12V).The
fine yellow line is connected to the device relay control line.
Cut off the positive connection line of the pump: then connect in series to the relay N.C
contact (thick green line 87a) and the other end relay COM contact (thick green line 30).
Keypod Orange/Orange
Black/Red
TX
RX
GND
ACC
V- Black(thick)
V+ Red(thick)
Color
Connect to SOS button
Connect to Microphone
Green Sending data(TX)backup
White Receiving data (RX)backup
Black
Yellow Connect to relay control line
Orange Connect to ACC ignition
Vehicle12V/24V negative
Vehicle12V/24V positive
Instruction
Ground wire
storage battery
storage battery