Stop - Philips SACD 1000/001 Service Manual

Diagnostic software, trouble shooting and test instructions
SMA error codes
Error Error name
Number
0000 SMA_TIMEO
UTERROR
5.2.4 Reprogramming of region code
Caution
This information is confidential and may not be distributed. Only a qualified service person should
reprogram the mono board.
After repair of the mono board, all the customer settings and also the region code might be lost (P0).
Reprogramming of the mono board will put the player back in the state in which it has left the factory,
i.e. with the default settings and the allowed region code.
Reprogramming is limited to 25 times.
When the counter reaches 25, reprogramming is not possible anymore and the region code change counter
must be reset by means of the Diagnostic Software.
Reprogramming will be done by way of the remote control.
Put the player in stop mode, no disc loaded.
Press the following keys on the remote control:
<PLAY> followed by numerical keys <1> <5> <9>
The display shows:
Press now successively the following keys :
for SACD1000/001(P1): <0><0><1> <0><0><0><0><0><0><0><0><0>
for SACD1000/171(P2): <0><0><2> <0><0><0><0><0><0><0><0><0>
for SACD1000/691(P3): <0><0><3> <0><0><0><0><0><0><0><0><0>
Press <PLAY> again.
The TV screen will become BLUE during a short time to confirm that the digital board has been
reprogrammed.
5.2.5 Trade mode
TRADE MODE
When the player is in Trade Mode, the player cannot be
controlled by means of the front key buttons, but only by means
of the remote control.
IF TRADE MODE OFF
SWITCH PLAYER OFF
PRESS 2 KEYS
SIMULTANEOUSLY
<PREV> + <OPEN/CLOSE>
SWITCH PLAYER ON
PLAYER IS IN TRADE MODE
WHEN PRESSING FRONT
KEYS, THE PLAYER
DOESN'T RESPOND
Figure 5-5
5.3 MENU AND COMMAND MODE INTERFACE
5.3.1 NUCLEI NUMERATION
Each nucleus has a unique number of four digits. This
number is the input of the command mode.
Explanation
Data coming from disc not in
time. Reason: damaged disc or
engine problem.
" - - - - - - - - - - - "
IF TRADE MODE ON
SWITCH PLAYER OFF
PRESS 2 KEYS
SIMULTANEOUSLY
<PREV> + <OPEN/CLOSE>
SWITCH PLAYER ON
PLAYER IS IN NORMAL MODE
WHEN PRESSING FRONT
KEYS, THE PLAYER WILL
RESPOND
CL 06532152_011.eps
051200
Figure 5-4
[ XX YY ]
The following groups are defined:
Group number Group name
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
SACD 1000 5.
CL 06532152_010.eps
Nucleus number
Nucleus group number
CL 06532152_012.eps
Figure 5-6
Basic / Scripts
Host decoder (Sti5505 and memory)
Audio / video encoder (DVDR only)
VSM (DVDR only)
NVRAM
Front Panel
Basic Engine
Analogue board (DVDR only)
DVIO (DVDR only)
Loop nuclei (DVDR only)
Library sub nuclei (I2C nuclei)
User interface
Furore (SACD only)
DAC (SACD only)
Miscellaneous
GB 29
051200
051200