Siemens SIMATIC PC 670 V2 Installation Manual page 22

Release 06/04
Special features:
• Touchware settings
The "USB" controller type must be selected for installation of the TouchWare
driver.
Settings:
The Touchware is started by clicking on the Microtouch/Touchware icon on the
desktop. The Right-click and Drawing settings should be defined as active
default settings in Touchsettings.
• Display brightness control (SETBRIGHTNESS)
The Setbrightness tool is provided to control the brightness of the integrated
back-lighting.
• Network
The Plug & Play hardware detection integrated in Windows XP detects the
onboard network adapter and installs it automatically. However, it is
recommended to install the VIA Rhine II Fast Ethernet Controller network driver
from the Documentation & Drivers CD.
• USB 2.0
Service Pack 1 from Windows XP is required for correct installation.
Note
When the operating system has been fully installed with the listed drivers and
applications, the Network controller entry in Other devices is assigned an
exclamation mark.
This network controller indicates the MPI interface. A corresponding driver is
supplied with appropriate software; e.g. Step7, ProTool, WinCC, WinCC flexible,
WinAC or Simatic Net.
Installing Drivers