2. MOBILE ASSISTANT OPERATION
1. MOBILE ASSISTANT
The Mobile Assistant function is a
voice input assist function. Mobile
Assist supports the Siri Eyes Free
Mode and Google App. Instructions
can be spoken into the vehicle
microphone as if speaking a command
to the phone. The content of the
request is then interpreted by the
phone and the result is output from the
vehicle speakers. To operate the
Mobile Assistant, a compatible device
must be registered and connected to
this system via Bluetooth
1
Press and hold the
steering wheel until you hear the
beeps.
2
Mobile Assistant can be used only
when the following screen is displayed.
To cancel the Mobile Assistant, select
"Cancel", or press and hold the
switch on the steering wheel.
To restart the Mobile Assistant for addi-
tional commands, press the
on the steering wheel.
®
. (P.42)
switch on the
switch
• Mobile Assistant can only be restarted
after the system responds to a voice
command.
• After saying a command, the Mobile
Assistant function will automatically end
to complete the requested action.
The volume of the Mobile Assistant can
be adjusted using the "PWR·VOL"
knob or steering wheel volume control
switches. The Mobile Assistant and
phone call volumes are synchronized.
INFORMATION
●
The available features and functions
may vary based on the iOS/Android ver-
sion installed on the connected device.
●
While a phone call is active, the Mobile
Assistant cannot be used.
●
If using the navigation feature of the cel-
lular phone, ensure the active audio
source is Bluetooth
order to hear turn by turn direction
prompts.
●
Wait for the listening beeps before using
the Mobile Assistant.
●
The Mobile Assistant may not recognize
commands in the following situations:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while the
Mobile Assistant is being used.
• The fan speed of the air conditioning
system is set at high.
• The air conditioning vents are turned
toward the microphone.
®
audio or iPod in
135
4