Basic Information Before Operation; Initial Screen - Toyota Camry 2018 Owner's Manual

1. BASIC INFORMATION BEFORE OPERATION

1. INITIAL SCREEN

Vehicles without a smart key system
When the engine switch is turned to the
"ACC" or "ON" position, the initial screen
will be displayed and the system will begin
operating.
Vehicles with a smart key system
When the engine <power> switch is turned
to ACCESSORY or IGNITION ON <ON>
mode, the initial screen will be displayed
and the system will begin operating.
 After a few seconds, the caution screen
will be displayed.
 After about 5 seconds or selecting "Con-
tinue", the caution screen automatically
switches to the next screen.
WARNING
●
When the vehicle is stopped with the
engine running <the hybrid system oper-
ating>, always apply the parking brake
for safety.
30
MAINTENANCE
INFORMATION*
This system reminds users when to re-
place certain parts or components and
shows dealer information (if regis-
tered) on the screen.
When the vehicle reaches a previously
set driving distance or date specified
for a scheduled maintenance check,
the maintenance remainder screen will
be displayed when the system is
turned on.
 The screen goes off if the screen is not
operated for several seconds.
 To prevent the screen from being dis-
played again, select "Do Not Tell Me
Again".
 To register maintenance information:
P.65
 If is selected, the registered
phone number can be called.
RESTARTING THE SYSTEM
When system response is extremely
slow, the system can be restarted.
1
Press and hold the "PWR
for 3 seconds or more.
*: Entune Premium Audio only
·
VOL" knob