Samsung AR12FSFPESNNEU Service Manual page 56

PROBLEM
adjustment is not
working.
Fan speed
adjustment is not
working.
Remote
controller is not
working.
Timer function
does not set.
The indicator
is blinking
continuously.
Odors permeate
in the room
during operation.
Error is indicated.
Noise is
generated.
Smoke is
generated from
the outdoor unit.
Water is dropping
from the outdoor
unit piping
connection.
5-2
SOLUTION
Check if you have selected Auto/Dry/
these modes, desired temperature is set to auto and you
cannot adjust the temperature.
Check if you have selected Auto/Dry/Turbo/
mode. In these mode, fan speed is set to Auto and you
cannot adjust the fan speed.
your
Check if batteries are depleted.
Make sure nothing is blocking your remote controller
sensor.
Check that there are strong lighting apparatus near the air
bulbs or neon signs may interrupt the electric waves.
Check if you press the Set button on the remote controller
after you have set the time.
Press the Power
If the indicator is still blinking, contact the service center.
Check if the appliance is running in a smoky area. Ventilate
the room or operate the air conditioner in Fan mode for
1~2 hours. (We do not use smelly components in the air
conditioner.)
When an indoor unit indicator blinks, contact the nearest
service center.
Depending on the status of the air conditioner usage, noise
normal.
If may not be a
defrost operation from outdoor heat exchanger during Heat
mode in winter.
Water may be generated because of the temperature
button or disconnect the power plug/
but it can be a steam generated by the
mode. In
Samsung Electronics