Advertisement
DOCKING AND UNDOCKING THE COMPUTER
1.
DOCKING PROCEDURE
1.Insert FZ-A2 into the vehicle mounter as shown
2.Ensure the bottom of the FZ-Z2 is located in the vehicle mounter
3.Push the top of the locking mechanism (slightly press release button assist)
4.
Unlocked
5.
UNDOCKING PROCEDURE
4.Ensure the lock is in the unlocked position.
5.Push the release button.
6.Remove the FZ-A2 from the dock
NOTE:
Portions of your car mounter may differ somewhat from the illustrations in the operation instructions,
but this should present no problems in actual use. Be sure to follow the operating instructions
when using your car mounter.
Locked
5.
2.
6.
3.
4 / 5
Advertisement
