Speaking Commands; About Voice Commands; Activating Voice Command; About Icons And Tones - Uconnect 3/3 Owner's Manual

3. Press View on Map.
4. Press Go!
Changing The Map Coordinate Format
1. From the Home Screen, press Where To? > Coordinates
> > Format.
2. Select a format.

SPEAKING COMMANDS

About Voice Commands

NOTE: The voice command feature is not available for all
languages or regions.
The voice commands allow you to use your navigation
system by speaking the words you see on the screen or by
speaking certain commands.

Activating Voice Command

• Press the "Voice Command" button.
• The navigation system enters voice command.
NAVIGATION MODE — IF EQUIPPED 57

About Icons And Tones

• The navigation system sounds two tones when it enters
and exits voice recognition mode.
• A
red icon appears in the upper-right corner of the
screen when the navigation system is not ready for
your command.
• Wait until the
icon is green to speak your
command.

Tips for Using Voice Commands

• Speak in a normal voice directed at the navigation
system.
• Speak commands as they appear on the screen.
• Respond to voice prompts from the navigation system as
needed.
• Speak "Exit" to exit voice command.
5