Mitsubishi Pajero Manual page 98

COMPONENT SERVICE-IGNITION
SYSTEM
6. Remove two screws and remove igniter.
7. Remove lead wire (black).
8. Remove signal rotor shaft tightening screw and two
breaker plate retaining screws.
9. Remove signal rotor shaft and breaker plate assembly.
10. Remove signal rotor shaft from signal rotor.
11. Remove, two spring ret&ers with pliers and th.en remove
two governor springs.
12. Remove two governor weights.
Spring retainer
I
Governor
I
spring 6ELO92
I
8-98