Hitachi CP-WX11000 Service Manual page 70

12. Detaching the Shift cover.
13. Assembling the Control unit.
14. Attaching the thermistor to lamp house.
CP-WX11000 ( P6WX )
Shift cover
2 screws
KEYPAD board
• Combine KEYPAD board and Control unit case by 5
hooks completely.
• Tighten 2 screws after you attached KEYPAD board to
Control unit case. ( Torque : 0.588
Lamp house
Thermistor
Stopper
Insert Stopper with a click.
Thermistor
Remove this cushion before
you detach the shift cover.
When attach/detach shift
cover, never make it touch
motor terminal.
5 hooks
CAUTION
Attach thermistor in right direction.
NG
70
~ 0.784Nm )
CAUTION
OK
Turn cable side to upper