3. Maintenance
(1) Clean the LCD panel surface with Swab.
Swab
4. Cleaning the panels and optical filters
Using swab and air duster, remove the dust.
Optical filter
5. Re-assembly
Re-assemble the set in the reverse order of the disassembly.
CP-WX11000 ( P6WX )
• While removing the dust, separated dust
Swab
will be blown off by air cooling system.
• Please pay attention not to damage
panels and optical filters.
Panel
Holder
Air
25
(2) Insert Swab between LCD panel and PRISM
when you clean the back surface of LCD panel
and Optical fi lter. (Refer next section.)
Swab