Hitachi CP-WX11000 Service Manual page 26

6-5 Battery
Be careful of handling batteries, since a battery can cause explosion, cracking or leakage that could result
in a fire, injury, or environment pollution.
. Use only the specified batteries. Do not use batteries of different types.
. When replacing, replace both of the batteries with new batteries of the same type. Do not use a new bat-
tery with a used battery.
. Do not use a battery with damage, such as scratches, dents, rust or leakage.
. Make sure the plus and minus terminals are correctly aligned when loading a battery.
. Do not work on a battery; for example recharging or soldering.
. If the remote control is not used for a long period of time, remove the batteries.
. Keep batteries in a dark, cool and dry place. Never expose a battery to a fire or water.
. Keep batteries away from children and pets.
. When a battery leaks, wipe the leakage out well with a waste cloth. If the leakage adheres to your body,
immediately rinse well with water. When a battery leaks in it's battery holder, replace the batteries after
wiping the leakage out.
. Obey the local laws on disposing a battery.
6-5-1 Replacing Internal Clock Battery
Consumption of the battery makes the clock not work correctly. When the clock is wrong or it has
stopped, replace the battery according to the following procedures.
• Only Service personnel are allowed to perform these procedures.
• Place projector on a stable and horizontal surface before commencing.
CP-WX11000 ( P6WX )
WARNING
CAUTION
26