Subaru 2003 LEGACY Service Manual page 38

DIAGNOSTIC PROCEDURE FOR POWER INDICATOR LIGHT
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
7 CHECK HARNESS CONNECTOR BETWEEN
TRANSMISSION AND TRANSMISSION
GROUND.
Measure resistance of harness between trans-
mission and transmission ground.
Connector & terminal
(T4) No. 16 — Transmission ground:
Is the measured value less than the specified
value?
8 CHECK POOR CONTACT IN CONNECTORS.
Is there poor contact in control module power
supply and ground line?
Step Value
1 Ω
There is poor contact.
AT-36
Yes
Go to step 8. Repair open circuit
in harness
between transmis-
sion and transmis-
sion ground.
Repair connector. Replace TCM.
<Ref. to AT-76,
Transmission Con-
trol Module
(TCM).>
No