Subaru 2003 LEGACY Service Manual page 112

DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
15 CHECK HARNESS CONNECTOR BETWEEN
TRANSFER DUTY SOLENOID AND TRANS-
MISSION.
Measure resistance of harness between trans-
mission connector and transmission ground.
Connector & terminal
(T4) No. 6 — Transmission ground:
Does the measured value exceed the specified
value?
Step Value
1 MΩ
AT-110
Yes
Even if "POWER" Repair short circuit
indicator lights up, in harness
the circuit has between transfer
returned to a nor- duty solenoid and
mal condition at transmission con-
this time. A tempo- nector.
rary poor contact
of the connector or
harness may be
the cause. Repair
harness or con-
tact in the transfer
duty solenoid and
transmission con-
nector.
No