Led Indicators - MSI MEGA ePower 1000HD User Manual

MEGA ePower 1000HD
Standby: Press the button for more than 3 seconds to switch between the
working mode and the standby mode.
Button Pressing Time
Reset > 10 seconds
Security > 10 seconds
Security 1-3 seconds
Standby > 3 seconds
Standby > 3 seconds
4.3

LED Indicators

There are three LED indicators on the front panel to indicate the status of the
device.
Figure 4 Removing a device from the network
Table 2
Restore factory default settings.
A random network key is generated for the
device and the device is removed from the
network.
Exchange the network keys and add a device to
the network.
Enter the standby mode if the device is currently
in the working mode.
Enter the working mode if the device is currently
in the standby mode.
Button description
Effect
6