Buttons - MSI MEGA ePower 1000HD User Manual

MEGA ePower 1000HD
4.2

Buttons

Reset: Press the button for over 10 seconds to restore the factory default
settings.
Security: Set the status of the device members. It is used to add devices to
the existing network or remove devices from the existing network. You can
observe the status of the Security indicator to know the process and result.
Add
Assume that an existing network contains devices A and B that share the same
network key and device C wants to join the network. To add device C to the
network, do as follows:
Note:
Devices that share the same network key are in the same network.
(1) Press the button for 1-3 seconds on device C.
Figure 2 Buttons
4