Dealer Script; Purpose Of Dealer Script; Contents Of Dealer Script; Diagnostic Software & Script Interfaces - Philips DVD 950 Service Manual

Hide thumbs Also See for DVD 950:
Table of Contents

Advertisement

DIAGNOSTIC SOFTWARE : SCRIPT INTERFACES
7. DIAGNOSTIC SOFTWARE : SCRIPT INTERFACES
7.1

DEALER SCRIPT

7.1.1

Purpose of Dealer Script

The dealer script can give a diagnosis on a standalone DVD
player; no other equipment is needed to perform a number of
hardware tests to check if the DVD player is faulty. The
diagnosis is simply a "error" or "pass" message; no indication
is given of faulty hardware modules. Only tests within the scope
of the diagnostic software will be executed hence only faults
within this scope can be detected.
Nucleus
VideoColSetupComm
VideoScartSwComm
PapChksFl
PapDramWrR
PapI2cDisp
PapS2bEcho
PapI2cNvram
PapNvramWrR
CompSdramWrR
Press 2 keys simultaneously
<OPEN/CLOSE> + <PAUSE>
During the test, the following display
is shown: the counter counts down
from the number of nuclei to be run
before the test finishes. Example:
Description
Checks the I2C interface with the RGB video processor on the
9
Audio/Video board (only for DVD players with RGB video processor).
Checks the I2C interface with the scart switch on the Audio/Video
8
board
7
Calculate and verify checksum of FLASH memory.
6
Pattern test of all locations in the DRAM(s).
5
Checks the I2C interface with the slave processor on the display PCB.
4
Checks the I2C interface to the basic engine.
3
Checks the I2C interface with the NVRAM.
2
Pattern test of all locations in the NVRAM
1
Pattern test of all locations in the SDRAM(s).
Connect to mains.
NO
SET O.K.?
YES
7.1.2

Contents of Dealer Script

The dealer script executes all diagnostic nuclei that do not
need any user interaction and are meaningful on a standalone
DVD player.
The nuclei called in the dealer script are the following (the
number after each nucleus name corresponds with the number
being on the local display when the nucleus is executed during
the dealer script):
Figure 7-1
To exit DEALER SCRIPT ,disconnect from mains.
Figure 7-2
DVD 950
7.
CL 96532065_001.eps
120799
CL96532126_013.eps
261099
GB 45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvd950/171

Table of Contents