Bounce Flash Photography
The flash head moves on its own.
When Speedlite is first started and the shutter button on the camera
is pressed halfway with the flash head in a position other than the
forward-facing (0°) position, the flash head automatically moves to
the forward-facing (0°) position.
The AI bounce flash function is activated. When you do not want to
use the AI bounce flash function, set the <X> switch to the <0°>
position (p.42).
When the position of the flash head changes after you press the
<z> button and store (register) the bounce angle in the
Speedlite, pressing the camera's shutter button halfway returns the
flash head to the registered position.
"AI.B " is displayed. / The flash head does not move.
When Speedlite is not attached to the camera, the "AI.B "
animation is displayed and the flash head's AI bounce flash
operation is not performed.
When the orientation (position) of the camera has changed, double-
clicking the shutter button (pressing the shutter button halfway two
times in a row within a short period) activates the bounce angle
correction.
In AI.B full-auto mode, the flash head does not move even
when I press the camera's depth-of-field preview button.
Check whether or not the camera's depth-of-field preview button
functions as an AI.B full-auto distance measurement start button (p.46).
The modeling flash fires when the camera's
depth-of-field preview button is pressed.
Check whether or not the camera's depth-of-field preview button
functions as an AI.B full-auto distance measurement start button
(p.38, 46, 85).
Troubleshooting Guide
101