Usb Emodule Error Messages; Smbios Emodule Error Messages; Cpu Emodule Error Messages; Mps Table (Multi-Processor) Emodule Error Messages - Acer Aspire X3810 Service Manual

USB eModule Error Messages

Message Displayed
Warning!
Unsupported USB
device found and
disabled!
Warning! Port 60h/
64h emulation is not
supported by this
USB Host Controller!
Warning! EHCI
controller disabled. It
requires 64bit data
support in the BIOS.

SMBIOS eModule Error Messages

Message Displayed
Not enough space in
Runtime area!!.
SMBIOS data will not
be available.

CPU eModule Error Messages

Message Displayed
Warning! This system
board does not
support the power
requirements of the
installed processor.
The processor will be
run at a reduced
frequency, which will
impact system
performance.

MPS Table (Multi-processor) eModule Error Messages

Message Displayed
Insufficient Runtime
space for MPS data!
System may operate
in PIC or Non-MPS
mode.
Chapter 4
This message is displayed when a non-bootable USB device is enumerated and
disabled by the BIOS.
This message is displayed to indicate that port 60h/64h emulation mode cannot be
enabled for this USB host controller. This condition occurs if USB KBC emulation
option is set for non-SMI mode.
This message is displayed to indicate that EHCI controller is disabled because of
incorrect data structure. This condition occur if the USB host controller needs 64-bit
data structure while the USB is ported with 32-bit data structure.
This message is displayed when the size of the SMBIOS data exceeds the
available SMBIOS runtime storage size.
This message is displayed when the power requirements of the board do not match
the power requirement of the CPU.
This message is displayed when there is not enough space in the 0F000h runtime
area for creating MPS table.
Description
Description
Description
Description
67