Removing And Installing Devices While The Computer Is Turned Off - Dell Latitude D800 User Manual

Using the Module Bay
1 status button on the charge
gauge
2 second battery (top)
Removing and Installing Devices While the Computer Is
Turned Off
NOTE: If the device screw is not installed, you can
running and connected to a docking device (docked).
Your computer ships with an optical drive installed in the module bay. However, the device screw is not
in the optical drive but packaged separately. When you install your device in the module bay, you can install
device screw.
NOTE: You do not need to install the device screw unless you want to secure the module inside the
computer for security purposes.
If the Device Screw Is Not Installed
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in
the computer. Avoid pressing down on them or placing heavy objects on top of them.
1. Press the device latch release.
file://C:\temp\~hhE94F.htm
remove and install devices while the computer is
Page 2 of 12
2/27/2003