Cleaning And Maintenance; Lime Removal (Self-Clean) - Beko SPA7131P User Manual

Cleaning and maintenance

4
4.1 Cleaning
WARNING: When
you
with ironing, unplug
A
the appliance. You
can drain the water
in the reservoir by
opening the refill lid
(5) and tilting the
iron to the front.
1. Unplug the appliance before
cleaning.
2. Wait for the appliance to cool
down completely.
3. Use a slightly damp cloth to cle-
an the outer surface of the appli-
ance. Then dry it thoroughly.
4. Wipe the sediments and resi-
dues on the soleplate (3) with
a slightly damp cloth and soft,
nonabrasive liquid cleaner as ne-
cessary.
WARNING:
not use gasoline,
A
solvent and abrasive
cleaning agents or
hard brush to clean
the appliance.
12 / EN
are finished
Do
4.2 Lime removal
(Self-Clean)
Lime removal function cleans the
lime particles accumulated in the
steam generator reservoir of the
appliance.
Use this function once in every
2 to 3 weeks. If the tap water is
very hard (if lime particles fall
down from the soleplate (3) of the
appliance), use the lime removal
function more frequently.
1. Unplug the appliance.
2. Refill the appliance with water
(see. 3.3).
3. When the thermostat indicator
light (10) turns off, unplug the
appliance.
4. Keep the appliance in a hori-
zontal position over the sink
and shake the appliance while
pressing and holding the lime
removal button (6). Continue
until the water in the reservoir is
depleted.
It may take some
C
time for the water to
drip from the holes of
the soleplate.
Steam Iron / User Manual