Advertisement
Visit www.scaleman.com to purchase your WeighSouth VS2501
To Exit Accumulation Function
When viewing total accumulations Press
VS-2501 will return to weighing mode.
Check Weighing Function
The Check weighing function is used to show if a sample weighed is between
an upper and lower limit set by the user. To set upper and lower limits see C 13
and C14 in the menu settings. Once the upper and lower limits are set the An-
nunciators Light will function.
Hold Function
The VS-2501 is equipped with two Hold Functions. The Hold function is enabled in the
menu settings C 11. C11 3 is Auto hold and C 11 4 is Manual Hold using the key pad.
Auto Hold
When set to this function weigh the animal as normal by placing the animal on the
platform. Once the animal becomes stable (within tolerances) the VS-2501 will calculate
the average from various readings. Once the average is set the VS-2501 will lock in the
weight and the Hold Light will illuminate. The weight will return to normal reading after
the animal is removed from the unit.
Manual Hold.
When set to this function weigh the animal as normal by placing the animal on the plat-
form. Once the animal becomes stable (within tolerances) press the hold key and the
VS-2501 will calculate the average from various readings. Once the average is set the
VS-2501 will lock in the weight and the Hold Light will illuminate. The weight will return to
normal reading after the animal is removed from the unit.
Visit www.balances.com to purchase your WeighSouth VS2501
for 2 seconds, Press
, Press
The
Advertisement
