Installation instructions
Install microwave oven
Guide Install
Raise range
Lower range
Leveling Leg
Install_MG22M8074AT_EU_DE68-04449A-00_EN.indd 5
1. Hold the Guide Install into Outer
panel side hole.
Fix screws into Guide Install.
(Use the Silver Screw : 2 ea)
2. Adjust the microwave oven height
according to cabinet.
(Use the 6 mm allen wrench or the
adjustble wrench)
NOTE
Make sure all four levelling legs are the
same height.
3. Insert the microwave oven into the
cabinet.
4. Open the door. And use the 3 mm
drill to make holes. Fix screws into
Guide Install.
(Use the Black Screw : 2 ea)
NOTE
• Depth of the holes should be about
5 mm.
• Fasten screws with a screwdriver hand-
tight.
• Do not use an electric screw driver to
fasten screws.
English 5
2017-01-16
3:46:29