Sharp SH8010C User Manual page 116

To Set Java™ Application Request
"Connectivity" "Bluetooth"
"Java™ Application Request"
1. Select "On" or "Off".
To Turn Off Automatically
"Connectivity" "Bluetooth"
"Bluetooth Timeout"
1. Select the desired time.
Your phone turns the function off automatically after the
specified time.
To See Your Phone Details
"Connectivity" "Bluetooth"
Infrared (M 12-2)
Keep your phone within a distance of 20 centimetres from the other
infrared enabled device before searching. The infrared setting will
return to off when no data is transmitted/received via infrared
communication.
Infrared communication is only available when the phone is open.
Turning On or Off
"Connectivity" "Infrared"
1. Select "On(3 min)" or "Off".
The infrared setting is activated, and " " is displayed.
"Bluetooth Settings"
"Bluetooth Settings"
"My Phone Details"
"Switch On/Off"
Sending All Data
"Connectivity" "Infrared"
1. Enter your handset code.
The default handset code is "9999". For details on changing
the handset code, see "Change Handset Code" on page 102.
2. Select the desired data to send.
3. Enter the authorisation code.
Mass Storage
(M 12-3)
"Connectivity" "Mass Storage"
1. Select "Yes".
Note
• Activating Mass Storage mode also activates offline mode.
• Mass Storage is not available when the battery is low, a Java™
application is paused, music player is active, or a memory card
is not inserted in your phone.
USB Charge
(M 12-4)
"Connectivity" "USB Charge"
1. Select "Enable" or "Disable".
Note
• The battery can be charged with the AC charger regardless of
this setting.
"Send All"
Connectivity 115