Delta InsightPower SNMP IPv6 User Manual page 37

http://192.168.1.100/
Auto Restart
z
z
After you click Submit to confirm your auto restart setup, the SNMP IPv6
will send the command to the UPS to enable auto restart.
UPS Buzzer
z
z
After you click Submit to confirm your buzzer setup, the SNMP IPv6 will
send the command to the UPS to enable buzzer.
Voltage Sensitivity
z
z
After you set up your voltage sensitivity (there are Normal, Reduced, and
Low selections) and click Submit, the SNMP IPv6 will send the command to
the UPS to enable the UPS's voltage sensitivity function.
Transfer Voltage
z
z
After you click Submit to confirm your transfer voltage setup, the SNMP
IPv6 will send the command to the UPS to enable the relevant functions.
Low Battery
z
z
This configuration saves the setup values in the SNMP IPv6 and compares
with the values received from the UPS. If the received battery level is lower
than the assigned one, the SNMP IPv6 will trigger a low-battery alarm.
UPS Shutdown Action
z
z
This configuration saves your setup values in the SNMP IPv6 and compares
with the values received from the UPS. If an event like power failure or low
battery occurs, the SNMP IPv6 will send the assigned shutdown delay com-
mand to the UPS.
Chapter 5 InsightPower SNMP IPv6 for UPS Web
3 3