Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Equinox Systems Stage Haze 1500
Summary of Contents for Equinox Systems Stage Haze 1500
- Page 1 Stage Haze 1500 User Manual Order code: EQLED357...
-
Page 2: Safety Advice
• Make sure that the available mains supply voltage • This fixture is for professional use only - it is not designed for or is 240V AC, 50Hz. suitable for household use. The product must be installed by a • Make sure that the power cable is never crimped or qualified technician in accordance with local territory regulations. The safety of the installation is the responsibility of the installer. damaged. Check the equipment and the power cable The fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the mains • WARRANTY: One year from date of purchase. power supply immediately and have a qualified engineer inspect the equipment before operating again. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. Before filling the unit disconnect the mains. Never fill with hot liquids. Only use high quality, water based smoke fluid recommended by the manufacturer. Other smoke fluids may cause clogging and void the guarantee. Always make sure there is sufficient smoke fluid in the tank. Operating this smoke machine without smoke fluid will cause damage to the pump as well as over heating of the heater. Operate the unit only after you have familiarised yourself with its functions. Do not permit operation by persons not qualified for operating the unit and always drain the tank and use the original packaging if the unit is to be transported. www.prolight.co.uk Stage Haze 1500 User Manual... - Page 3 HAZE OUTLET. EXTREMELY HOT. DO NOT TOUCH. DO NOT COVER THE OUTPUT SLOT. KEEP AT LEAST 1m DISTANCE. POWER INPUT: 240V~50Hz FUSE: F8A 250V In the box: 1 x fixture, 1 x powerCON cable & 1 x user manual www.prolight.co.uk Stage Haze 1500 User Manual...
-
Page 4: Operation
DANGER TO LIFE! Disconnect from the mains before starting maintenance Only use quality haze fluids recommended by your dealer. You must not use substances which are classified as ‘DANGEROUS WORKING MATERIALS’ or ‘FLAMMABLE FLUIDS’. www.prolight.co.uk Stage Haze 1500 User Manual... - Page 5 Manual mode: VOLUME Press the button to start manual haze. PUMP/FAN The display will show the current settings eg ‘*Haze 50% Fan 100%’. You will notice an * will appear next to the word *Haze, you can now adjust the setting accordingly using the and buttons. If you want to adjust the Fan, simply press the FUNCTION button and the * will appear next to the word *Fan you can now adjust the setting accordingly using the and buttons. Press the button once to stop haze output. Please note: This mode is for continuous haze. button: Press the button until the LCD display shows ‘Do not off in clean 300S’. The unit will now perform its cleaning cycle. Once the LCD display shows ‘To turn off the POWER!!!’, you can then disconnect the unit from the mains power supply. www.prolight.co.uk Stage Haze 1500 User Manual...
-
Page 6: Troubleshooting
000-255 PMP (0-100%) Haze output volume (0-100%) 000-255 F (0-100%) Fan speed (slow-fast) Electronic Fluid-level-sensor: If the fluid runs out whilst the unit is in operation the unit will continue to operate for approx. 2 minutes, after this time the Electronic Fluid-level-sensor will stop the unit working to protect it. When this happens the LCD display will flash and show ‘Beware: No Liquid!’, this means the machine has run out of fluid, please refill. When this happens please do the following: Power off the unit and disconnect from mains power supply. Refill the fluid tank. (See page 4 for instructions on fluid replenishment) Reconnect the mains power supply. The unit can now be operated again. Troubleshooting: When the LCD display flashes and shows ‘Machine Temperature is too HIGH’. This could indicate the air filter on the side of the unit needs maintaining, please see page 7 for further instructions. Alternatively this could indicate that the PCB is faulty. If the problem persists, please contact your dealer. When the LCD display flashes and shows ‘Temperature sensor error’. This could indicate that the heater is faulty and is not heating up or the heater isn’t getting up to the right temperature. Please power the unit off and then back on. If the problem persists, please contact your dealer. www.prolight.co.uk Stage Haze 1500 User Manual... - Page 7 Step 1: Open the fuse holder on the rear panel with a suitable screwdriver. Step 2: Remove the old fuse from the fuse holder. Step 3: Install the new fuse in the fuse holder. (Replacement fuses should be of the same value as originally supplied) Step 4: Replace the fuse holder in the housing. Should you need any spare parts, only use genuine parts. If defective, please dispose of the unusable unit in accordance with the current legal regulations. Should you have any further questions, please contact your dealer. www.prolight.co.uk Stage Haze 1500 User Manual...
-
Page 8: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Note: DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Stage Haze 1500 User Manual... -
Page 9: Line Termination
5-pin XLR (male) 3-pin XLR (female) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Stage Haze 1500 User Manual... -
Page 10: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Stage Haze 1500 User Manual... - Page 11 Stage Haze 1500 User Manual...
- Page 12 Stage Haze 1500 User Manual...