Table of Contents
Advertisement
Define a server profile
1. In Standby mode, press [
Dev. mgr.
2. Press <Options> → Server profiles.
3. Press <Options> → New server profile.
4. Set the following server options according
to the instructions provided by your service
provider:
• Server name: set a name for this profile
• Server ID: set the ID of the remote
server
• Server password: set the password
that must be used by the device
manager to sync your device
• Access point: set an access point
• Host address: set the web address of
the host server
• Port: set a port to use for the device
manager
• User name: set a user name for this
profile
] → Tools →
5. When you are finished setting the options,
Start a configuration session
1. In Standby mode, press [
2. Press <Options> → Server profiles.
3. Scroll to a server profile and press
4. Press <Yes> to confirm.
5. Scroll to an access point and press the
• Password: set a user password for this
profile
• Allow configuration: set to allow the
server to configure your device
• Auto-accept all requests: set to
automatically accept new configuration
requests
• Network authentication: set to require
network authentication
press <Back>.
Dev. mgr.
<Options> → Start configuration.
Confirm key (if necessary).
] → Tools →
89
Advertisement
Table of Contents
