Table of Contents
Advertisement
Message
Try this to solve the problem:
Your SIM card is blocked, usually
X attempts
as a result of entering your PIN
remaining.
incorrectly several times. You
Enter PUK
must enter the PUK supplied by
code
your service provider.
Your device does not show a signal (no
bars next to the network icon)
• If you just turned on the device, wait about 2
minutes for your device to find the network
and receive a signal.
• You may not be able to receive a signal in
tunnels or elevators. Move to an open area.
• You may be between service areas. You
should receive a signal when you enter a
service area.
You forgot a security code, PIN, or PUK
The default lock code is 00000000. If you
forget or lose this or another code, contact the
seller or your service provider.
Your display shows white lines
The display may show white lines if you have
turned the device on after a long period of
disuse or if you removed the battery without first
turning off the device. The display should
correct itself in a short time.
You enter a number, but the call is not
dialled
• Ensure that you have pressed [
• Ensure that you have accessed the right
cellular network.
• Ensure that you have not set call barring for
the phone number.
].
b
Advertisement
Table of Contents
