Haivision Mantaray Quick Start Manual page 6

6. To specify the Furnace information, use the remote control to scroll down to Server Setup.
Enter the IP of the Furnace server and the corresponding port number. Click Save.
7. Wait until the STB application downloads and installs all necessary files from the Furnace server. If there is a
new software version, it will reboot. This may take a minute.
8. When the STB display opens again, it tunes to the first channel and begins playing audio and video.
When you press any of the volume controls (Mute, Up, or Down) on the remote control, a volume indicator
appears along the bottom of the screen.
HVS-ID-QS-MANTA-103, Issue 01
Mantaray Quick Start Guide
Joining Mantaray to a Furnace
Page 6 of 8