Cisco ONS 15454 SDH Manual page 11

Chapter 11 Circuits and Tunnels
Table 11-4
Port Color
Violet
Blue (Cyan)
A notation within or by the squares or selector pentagons on each node indicates switches and loopbacks,
including:
F = Force switch
•
• M = Manual switch
• L = Lockout switch
• Arrow = Facility (outward) or terminal (inward) loopback
Figure 11-2
window.
Figure 11-2
Move the mouse cursor over nodes, ports, and spans to see tooltips with information including the
number of alarms on a node (organized by severity), port service state, and the protection topology.
Right-click a node, port, or span on the detailed circuit map to initiate certain circuit actions:
• Right-click a unidirectional circuit destination node to add a drop to the circuit.
• Right-click a port containing a path trace capable card to initiate the path trace.
• Right-click an SNCP span to change the state of the path selectors in the SNCP circuit.
78-18119-01
Port State Color Indicators (continued)
Service State
Unlocked-disabled,automaticInService
Locked-enabled,maintenance
shows an example of a 2F-PCA circuit with a card in terminal loopback in the Edit Circuits
Terminal Loopback in the Edit Circuits Window
11.2.5 Circuit Information in the Edit Circuit Window
Cisco ONS 15454 SDH Reference Manual, R8.5
11-11