Chapter 3 Array Configuration; Network Settings; Creating A New Bond - Cisco C3124SA Manual

Array Configuration
This section covers topics related to the Cisco UCS Invicta C3124SA Appliance configuration.
Network Settings, page 3-1
Default Gateway, page 3-3
Host Settings, page 3-8
Storage Allocation, page 3-8

Network Settings

Modifying network settings will cause a brief interruption of connectivity to the C3124SA Appliance.
Caution
Use extreme caution when changing the settings on this window.
The Network Settings menu window displays the Ethernet Bond Status table. This is a sortable list of all
bonds currently available on this array. It also displays a sortable list of Fibre Channel interfaces. Right
clicking an interface presents menu options, for example, enable/disable, and so on.
The top buttons on this window can be clicked to create a new network interface bond, set a default
gateway, set the DNS servers, and set static routes.
This section describes how to create, edit, and remove a bond and explains the available bonding modes.
Caution Bond0 must not be deleted. Changing bond0 can potentially sever the array connection.

Creating a New Bond

To create a new bond, do the following:
Choose Array Configuration > Network Settings.
Step 1
The Network Setting window appears.
Click Create Bond.
Step 2
OL-31370-01
C H A P T E R
Cisco UCS Invicta C3124SA Appliance Administration and Configuration Guide
3
3-1