Additional Software; Rccmd; Installation; Figure 45: Rccmd - Overview - Generex CS121L User Manual

C)-xxxxx QC:Passed". The number after SN:B (or C) is the
motherboards serialnumber.
At CS121 external units you have to open the chassis to see this lable.
Example 1 : If youre lable is : "SN:B-14464", than the correct command to set the MAC adress
for your CS121 is: "set MAC 00-03-05-02-44-64"
Alternativly you may use the CS121 Productserial number (eg. 0121-06521) instead.
Example 2 : If youre Productserialnumber is : "0121-06521", than the correct command to set
the MAC adress for your CS121 is: "set MAC 00-03-05-02-2C-40"
5.

Additional Software

5.1

RCCMD

RCCMD is the client module for integrating an unlimited number of computers of any operating
system into an UPSMAN managed UPS facility. The main purpose is to transmit shutdown
signal or messages to RCCMD clients in other networks or on other OS.

Figure 45: RCCMD - Overview

From the UPS Management Software Suite (optional UPS software product) you may use the
module for multi server shutdown "RCCMD" (separate client license required) to shutdown
another networking computer, unregarded which OS. (for a complete list of RCCMD supported
OS please see the documentation-page of www.generex.de.
Please note that you need for every computer to receive an RCCMD shutdown call another,
separate license ! If you need to shutdown several 100 of computers in your LAN or WAN
within the same company or organization, you may ask your UPS reseller for an "enterprise
license" which allows the usage of a single license key for all your computers (optional).
Additionally, RCCMD can send messages and execute other programs on remote computer
via the CS121 SNMP adapter. In general, the jobs can be broadcasted and relayed from a
machine within its own segment. Depending on the network configuration and the number of
RCCMD licenses, an unlimited number of Computers/Servers can be shutdown. Please also
check the section RCCMD in the user manual of the UPS-Management Software. Contact your
UPS dealer to purchase RCCMD software.
5.1.1

Installation

Please start the installation of the RCCMD-client with the download of the latest version from
www.generex.de. (If included, use also the CD from the adapter package) Uncompress the
files, execute setup.exe and a wizard guides you through the installation. (Note: Some older
versions (using InstallShield5) sometimes stop the installation process with a window, which
shows you a completion of 99%. In this case, download the latest RCCMD-Version from the
www.generex.de download-page and continue.)
After you entered the Licence-Key a window to configure the IP-address appears. Add the IP-
address from the adapter(s), of which the client has to receive RCCND-signals.
49 50