Advertisement
Quick Links
IR Vandal-proof Dome CCD Camera
IR Vandal-proof Dome CCD Camera
CCTV SYSTEM
CCTV SYSTEM
www.q-see.com
www.q-see.com
C. CONNECTION
：
（
a
）
O ne monitor system with one camera
：
Video monitor
AC ADAPTOR
CAMERA
（
b
）
O ne monitor system with two or more cameras
：
Video monitor
AC ADAPTOR
CAMERA
DVR
P4
Digital Color CCD Camera
Digital Color CCD Camera
MANUAL
MANUAL
This camera uses a highly sensitive CCD
This camera uses a highly sensitive CCD
and full solid-state circuitry. It offers long life,
and full solid-state circuitry. It offers long life,
high reliablity and excellent image with anti-
high reliablity and excellent image with anti-
burn ability. It is not subject to distortion
burn ability. It is not subject to distortion
caused by magnetic fields. Easy to install, it
caused by magnetic fields. Easy to install, it
is an excellent choice for CCTV.
is an excellent choice for CCTV.
P1
P1
：
D. DRAFT
P5
：
：
A. OPERATION NOTICES
A. OPERATION NOTICES
（
（
1
1
）
）
K eep away from water;
K eep away from water;
（
（
2
2
）
）
D on't touch CCD with fingers,if necessary clean
D on't touch CCD with fingers,if necessary clean
and remove dust with soft cloth dipped in alcohol;
and remove dust with soft cloth dipped in alcohol;
（
（
3
3
）
）
I f you have questions or problems,please contact Q-see tech
I f you have questions or problems,please contact Q-see tech
support at ts@dpsi-usa.com or 877-998-3440.
support at ts@dpsi-usa.com or 877-998-3440.
：
：
INSTALLATION PRECAUTIONS
INSTALLATION PRECAUTIONS
1
1
D o not install the camera where it is aimed at a strong light.
D o not install the camera where it is aimed at a strong light.
（
（
）
）
（
（
2
2
）
）
D o not install the camera in a place where temperature
D o not install the camera in a place where temperature
goes above 60℃ (140° F),or there is high humidity or rain
goes above 60℃ (140° F),or there is high humidity or rain
（
（
3
3
）
）
D o not install the camera in a place where it is subjected to vibration
D o not install the camera in a place where it is subjected to vibration
or impact from other devices
or impact from other devices
（
（
4
4
）
）
C over the CCD if the camera will not be in use for a long time.
C over the CCD if the camera will not be in use for a long time.
P2
P2
P2 P 2
P2 P 2
E. SPECIFICATIONS
：
Image Sensor
1/3"SONY CCD
成 像 系 统
Picture Elements
像 素
NTSC: 752 582(H)
Horizontal Resolution
水 平 解 析 度
480TVL
Sync System
同 步 系 统
Internal
Internal
Scanning system
扫 描 系 统
Interlance 2:1
Elect Shutter time
视 频 输 出
1.0Vp-p 750 BNC
1/50s~1/100000s
White Balance
白 平 衡
ON/OFF
ON/OFF
Gamma
珈 玛
0.45
0.45
信 噪 比
≥50dB
S/N Ratio
Video Output
1.0Vp-p 75 BNC
电 子 快 门
Usable Illumination
最 低 照 度
0.5Lux/F1.2
AGC
On/Off
Lens
3mm~9mm
Power Supply
DC12V
Power Consumption
160mA
-20℃
～
+ 60℃ (-4°F to +140°F)
Operating Temp
增 益 控 制
Weight
625g (22oz)
P6
B. OPERATION PROCEDURES:
B. OPERATION PROCEDURES:
（
（
1
1
）
）
R emove the cap cover from top of camera.
R emove the cap cover from top of camera.
（
（
2
2
）
）
R emove C converter when using CS lens.
R emove C converter when using CS lens.
（
（
3
3
）
）
S crew on the lens.
S crew on the lens.
（
（
4
4
）
）
C onnect the camera to a monitor or recording
C onnect the camera to a monitor or recording
device with a 75 coaxial cable.
device with a 75 coaxial cable.
（
（
5
5
）
）
C onnect the camera to 12V DC power transformer.
C onnect the camera to 12V DC power transformer.
6
6
M odify the focus of lens to get an excellent image
M odify the focus of lens to get an excellent image
（
（
）
）
when image appears on the screen.
when image appears on the screen.
（
（
7
7
）
）
I f object does not focus properly,when modifying focal length, please
I f object does not focus properly,when modifying focal length, please
try the following
try the following
：
：
a Set the lens focal ring at unfixed.
a Set the lens focal ring at unfixed.
b Focus on an object which is far
b Focus on an object which is far
away from the camera.
away from the camera.
c Adjust the lens and focal ring to focus the
c Adjust the lens and focal ring to focus the
object until you get a clear image.
object until you get a clear image.
d Tighten the lens fix screw.
d Tighten the lens fix screw.
P3
P3
Design and specification are subject
to change without prior notice.
Printed in Jul.2008
Advertisement
