Using Your Appliance; Filling The Water Tank; Optimaltemp Technology - Philips GC9600 PerfectCare Elite Plus User Manual

Using your appliance

Filling the water tank

Fill the water tank before every use and when the 'water tank
empty' light flashes.
Do not add perfume, water from the tumble dryer, vinegar,
starch, descaling agents, ironing aids, chemically descaled
water or other chemicals, as they may cause water spitting,
brown staining or damage to your appliance.
1 Remove the water tank from the appliance and fill it with
tap water up to the MAX indication.
Tip: Your appliance has been designed for use with tap water.
If you live in an area with very hard water, scale builds up
quickly. In this case it is recommended to use distilled water
to prolong the life of your appliance.
2 Put the water tank back into the appliance by sliding in the
bottom part first. Then push the top part until it locks into
place.
'Water tank empty' light
When the water tank is almost empty, the 'water tank
empty' light goes on. Fill the water tank and press the steam
trigger to let the appliance heat up again. When the 'iron ready'
light lights up continuously, you can continue steam ironing.

OptimalTEMP technology

The OptimalTEMP technology enables you to iron all types
of ironable fabrics, in any order, without adjusting the iron
temperature setting.
Fabrics with these symbols are ironable, for example linen,
cotton, polyester, silk, wool, viscose and rayon.
Fabrics with this symbol are not ironable. These fabrics include
synthetic fabrics such as Spandex or elastane, Spandex-mixed
fabrics and polyolefins (e.g. polypropylene), but also prints on
garments.
ENGLISH
7