Reset Menu; Ntsc/Pal Output Select; Chapter 6：Record; Starting Recording - Q-See QSD2014 User Manual

5.19 RESET MENU

System allows you to reset all your settings to the DVR factory default. You need to enter your
password to reset the menu.

5.20 NTSC/PAL Output Select

6.1 Starting Recording

Press [●REC] button to start the record according to the record schedule you have set. There will
be a [●] red icon shown in the top left of the screen when recording.
Change the jumper JS1 to select NTSC or
PAL video output format shown on the silkscreen
shown in the picture on the left. The picture shows
the setting for PAL, move the jumper to the right
side for NTSC
Chapter 6：Record
12
QSD2014 User's Manual