Hard Drive Setup; Miscellaneous Setup - Change Password - Q-See QSD2014 User Manual

Press "Stop" button to disable all areas, and press "Quad" button to select all areas.

5.10 Hard Drive Setup

Hard Drive Setup
OVERWRITE ENABLED
MAXTOR STM250310AS
MASTER HDD SIZE
MASTER HDD USED
MASTER HDD FORMAT
SLAVE HDD SIZE
SLAVE HDD USED
SLAVE HDD FORMAT
( ) MOVE (SEL)SELECT (MENU)EXIT
HDD SIZE：indicates the total capacity of the hard drive installed in the DVR.
HDD USED：indicates the space used in the hard disk drive for recording and the percent used.
HDD FORMAT：will erase all video and data on the installed hard drive and make it readable by the DVR.
Note: You will be prompted for the password when formatting a hard drive and the default password is "111111".
5.11 Miscellaneous Setup – Change Password
Miscellaneous Setup
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( ) MOVE (SEL)SELECT (MENU)EXIT
CURRENT PASSWORD
NEW PASSWORD
COMFIRM PASSWORD
[ON]
250203MB
124931MB 50%
N/A
N/A
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
[ ON ]
[- - - - -]
[- - - - -]
[- - - - -]
Area Selection：Press [▲，▼，◄◄ and ►►]
buttons to select a block and then press [SEL] button
to set the block to detect motion. The area is
detectable when it is clear, the area is not detectable
when it is covered by shadow.
OVERWRITE ENABLED：
ON: System overwrites oldest files when hard drive
is full;
OFF: System stops recording when hard drive is full.
This option allows you to change the system
password. The password must be six characters. All
keys can be used as a password key except the
[MENU] key, which is used to exit.
Enter the current password first, and then enter
six characters as your new password, repeat the new
password to confirm.
If you forget your password, please free feel to
contact Q-See tech support for assistance.
9
QSD2014 User's Manual