Alpine CDE-173EBT Owner's Manual page 35

Mounting the unit in the dashboard
• Before installing, make sure the catches on
both sides of the bracket
2 mm (3/32 in).
• For Japanese cars, see "Mounting the unit in a
Japanese car" (page 35).
1
Position the bracket
dashboard, then bend the claws outward
for a tight fit.
53 mm (2 1/8 in)
2
Mount the unit onto the bracket
attach the protection collar
Notes
• If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
• Make sure the 4 catches on the protection collar
properly engaged in the slots of the unit.
are bent inwards
inside the
182 mm (7 1/4 in)
Catch
, then
.
are
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult
your Alpine dealer.
TOYOTA
to dashboard/center console
Bracket
Existing parts supplied
with your car
NISSAN
to dashboard/center console
Bracket
Existing parts supplied
with your car
Note
To prevent malfunction, install only with the supplied
screws .
Detaching and attaching the front
panel
For details, see "Detaching the Front Panel"
(page 8).
Resetting the unit
For details, see "Resetting the Unit" (page 8).
Bracket
Bracket
35
-EN